The Tilta Hydra Alien is a 3-point Mounting system with a shock-absorbing arm, with a 7.5kg payload making it suitable for a wide range of DSLR, Mirrorless and Compact camera setups. Designed to integrate with the Ronin RS-2, however a variety of small gimbals are also compatible.
The Freefly MOVI Pro motorized gimbal stabiliser steadies cameras weighing up to 15lb / 6.8kg, making it compatible with small mirrorless cameras all the way up to smaller cinema cameras such as the Arri Mini. With the included batteries, the camera and essential accessories can be powered...
The one motion control that does it all. You will drastically improve the quality of your shots with the JibONE, the app-controlled VERY SMART jib that fits in edelkrone backpack.
The jibONE offers you freedom of movement. Use it horizontally for your slider like shot,vertically...
Jib arm capable of holding 15kg on an arm that extends up to 120cm. The ProSup E-Jib folds neatly down to 72 cm and weighs only 11 kg, all folding into one easy to carry hard case for easy transportation and moving between locations.
Adjustable both front and rear of the jibs pivot point...
The Ronin 2 is the newest high-end stabilisation gimbal system from DJI. Capable of holding over 13kg it can comfortably support cameras such as the Arri Alexa Mini with lens and wireless follow focus units. This has been a fantastic addition to the hire market as it makes high-end steadycam...
Bringing big budget camera moves to your production the Freefly MOVI M15 was designed for the most demanding cinema packages out there with no compromise made with its design. It has a maximum payload of 15lb / 6.8kg with compatible camera / lens combinations making able to easily take Arri Mini...
Three modes of operation ; underslung, upright and briefcase mode.
Can take a load of 7.25kg (16lbs) with accuracy of 0.02 degrees and rotates on 3 axis with incredible control and smoothness, and you can even tinker with the settings via bluetooth using a smartphone.
A smaller and lighter version of the popular DJI Ronin - the Ronin-M supports a camera up to 3.6kg (8lbs). Can be used in 3 modes ; underslung, upright and briefcase mode.
Very popular hire item, especially with smaller cameras such as the A7Sii and Canon 5D. Lightweight enough for longer...
DJI RS 2 isn’t just a gimbal – it is an unparalleled solution for dynamic cinematography. Every design element and feature is made to deliver industry-leading camera stabilisation. Simply put, DJI RS 2 is crafted for you to master filmmaking.
Gimbal Capacity Group: 4-5kg...
Tilta Float Handheld Gimbal Support attaches to the Ronin RS-2 to give a range of further options and ease of use. V-Lock plates allow a wider range of accessories to be used, and turn the RS 2 into a more ergonomic and practical setup.
The Ronin RS2 (or other compatible gimbal) must be...
The DJI Ronin-S (RoninS) is an incredibly simple, light and friendly-to-use stabiliser for DSLR and mirrorless video cameras. Unlike the larger Stabalisation systems the Ronin-S does not need as much fine-tuning, making it quick to rig and use without too much faffing around, yet giving you...
The Easyrig 5 Vario with Extended Arm +230mm/9in. The Easyrig vario 5 gives you the same advantages as the other Easyrig models with the added benefit of being able to adjust the line tension to adapt to many different cameras and configurations.
The Easyrig Vario 5 still delivers the same...
Easyrig Cinema 3 holds between 7.7kg and 9.9kg, taking the weight off your arms for sustained amounts of handheld work, distributing the weight evenly over your shoulders and waist.
This is a perfect size for Sony FS7, FX9.
If you are using a Gimbal such as a Ronin-2 or a MoVi Pro...
Easyrig Minimax holds between 2kg and 7kg, taking the weight off your arms for sustained amounts of handheld work, distributing the weight evenly over your shoulders and waist.
If your camera setup is more than 7kg then you'd need something like the...
The Oconner O Rig Hand Held Moduler Rig is a collection of OConnor parts to produce bespoke rig solutions. All parts pack into one easy to transport hard case.
The Super Pee Wee III+ camera dolly is the perfect location dolly that allows the camera to be raised and lowered via a hydraulic arm. It offers a small footprint so it can be maneuvered into tight spaces, and built-in track wheels for both straight and curved track. These dollies also...
This lightweight dolly on which a seat swivel support or JanJib can be mounted, comes with trackwheels and pneumatic wheels. The Matador can be widened with sideboards which are supplied standard with the Matador Dolly. Its extendable back-axles will guarantee a very high degree of stability....
Egripment Focus Dolly is a full sit-on Dolly Solution, which packs down very well to make it transportable in large cars or small vans. This makes it much easier to transport than the PeeWee or Matador, whilst still giving a solid, smooth, professional dolly setup.
Straight and Curved...
The Keywest Pallada Design Magic Dolly is a solid and smooth sit-on dolly, with extendable bazooka base , 100mm bowl attachment, push bar, steering lock and 360 degree swivel seat.
Can be used on pneumatic tyres or on standard track, with a simple click-on-click-off system that makes...
The Focus Dolly is the simple and portable flat bed dolly with push bar. It folds up neatly into a metal case for easy transportation, but provides a solid and smooth flat bed dolly for your camera setup to sit on top of.
Straight and Curved track available - let us know your...
Jib Arm extension unit for standard bazooka bases, meaning it can be paired with the Key West Magic Dolly, Chapman PeeWee Dolly, Egripment Matador Dolly.. nearly anything that uses the standard bazooka setup.
Supports 100mm bowl head.
Libec TR-30 Dolly and Track is perfect for tracking shots. Easily and quickly assembled into a 3m straight, it is also extremely light and mobile making it perfect for location work and studio alike.
High-End Film quality, solid metal and super-smooth track.
Available in 8', 6’, 4’and 2' straight sections, curved sections also available.
High-End Film quality, solid stainless steel, super-smooth Curved Precision track.
Available in 14', 21' and Supercurve 31' diameter.
Various types of scissor track available for standard dolly systems. Fold down for easier transportation than the solid Ronford Baker sections.
DollyCrane HD combines the function of the slider, Mini Jib and tower.
Once set up, the system can instantly change its function from slider to Mini Jib and back thanks to its unique construction.
As the model name implies, this is a heavy duty version of the popular DollyCrane, and...
The Libec JB-30U job arm system is robustly engineered and takes only minutes to set up - Making it ideal for domestic location use and studio alike.
It has a 1.7m vertical jib range and can support up to 20kg.
Supplied with weights, under-mount kit, heavy duty legs and heavy duty...
A stand-out feature of the Jib50 is its telescopic arm. Rather than fixing on extension units, a time consuming and often fiddly process, Jib50's arm simply extends by turning the lock levers. Despite this additional mechanism, the Libec jib is still able to support considerable loads. Even...
The kit comes with..
Handgrip Adapter which allows camera operators to adjust camera settings while framing.
Adapter Plate with a set of 15mm bars
Follow focus and Matte Box supplied separately
Camera Rigs available for various setups. From simple handheld 5D rigs to full Arri Cinema Rigs with follow focus's, matte boxes, powered hand grips..
Rigs are bespoke to camera and lens combinations so please give us a call with your requirements.
The Movcam 303-2400 Accessories Kit is compatible with the Sony Alpha A7S MkII and A7R MkII system cameras. It includes a camera cage with accessory shoe, top handle, riser block and LWS Base Plate.
Our POV Helmet Rig is designed for an A7s MkII or 5D Cameras and gives you those realistic point of view shots.
1 x Crash Helmet
1 x Pump up Neck Brace
2 x Velcro weights
2 x Small Noga Arms
***Please note this price does not include the...
The Crane Plus is capable of supporting a camera and lens that weigh up to an impressive 2.5kg / 5.51lbs. Not bad for such a handy small unit. So it can be used with small cameras like Panasonic's GH4/5 or the Sony A7Smk2 and gives a fluid stabilised look to your footage.
We really like the Osmo X3 but the X5 is just as good at holding a steady shot and it has a much better camera. The Zenmuse X5 camera has a micro 4/3 sensor for improved low light, impressive dynamic range and better overall image quality.
It records in HD or 4K and takes 16 megapixel...
The DJI Osmo camera is an almost unique product. It produces super smooth fully stabilised video in HD or 4K and it is a joy to use all at a very reasonable price. It can be used instead of a gimbal or stabiliser, or with a car and bike mount, on a tripod, or handheld. It has 1 hour of video...
Moy fitting High Hat on a triangular plate
This is a complete kit comprising of small and large risers for any height requirement.
Perfect for use with the Floatcam HD
The Ronford Baker Ultra high precision 48" slider is a standard of the film industry because it is the best.
Supplied with precision ground stainless steel runners and rollers, 360 degree lockable rotation and adjustable magnetic stops.
Ultra high precision, ground stainless...
1.2m slider, capable of comfortably holding up to 15kg. Can also be extended up to 2m, and has magnetic end stops to ensure a smooth end to the movement.
It takes a standard 100mm bowl head, so if you don't want to go all the way with the Ronford Baker slider and start dealing with Moy...
1.5m solid Glidetrack unit with 100mm bowl head.
Suitable for use with 100mm bowl tripods (not provided) such as Sachtler Video 18P or Miller Compass 25.
iFootage Shark slider with counterweight to make a wonderful smooth tracking movement.
Slider rails which can be extended up to 1.3, and fit in a one small easy to carry bag.
Perfect for use with DSRL, C100, C300.
Add on the SYRP Genie control unit to allow unit to be...
The Genie allows both panning and linear motion control, and attaches to standard gear such as dollies, sliders, jib arms and tripods.
Can be set to repeat certain movements with precision, and even repeating at a percentage of the speed, allowing you to overlay tracking shots at...
The Hague SM3 Pro Suction Mount for cars has 3 suction pads which can be attached to any horizontal or vertical, non-porous flat surface. There are 3 adjustable brackets on the suction pads and 3 on the triangle plate, with a selection of connecting poles of different lengths so the mount can be...
Reflective Polyboard with stand and holder.
We have a large variety of used Polyboard in different sizes that we can hire out individually, so if you need it to fit in your car or have it painted black on one side or with a silver reflector, please do ask for your specific requirements...
Box of Grip contains:
2x Super Clamp
A classic really handy, easy to position piece of grip to add to your arsenal
5/8'' (16mm ) with 1/4'' and 5/8'' (16mm ) with 3/8'' attachments
3Kg (6,61 lb) payload and 53cm (20,8in) length
The most versatile single piece of light grip gear you will ever have
Payload of 15Kg, hexagonal 16mm attachment with 1/4'' thread
Standard 1/4-20 inch thread mount for cameras a great accompaniment to any Magic Arm
Various lighting stands available.
Note : All lights come with stands as part of the kit.
This Double wind up stand has a 30Kg Payload Heavy Duty Stand
Ideal for HMI's and Mega Booms
Free Sliding Light Stand
5' Max Height
21 to 22"
15 to 19 lbs
Very sturdy stand, with 40" arm to attach a range of accessories.
Autopole with extend and grip between 2 walls to give you horizontal bar to attach lamps or green screen to.
This is the largest boom manufactured by Manfrotto. Movement - including pan, tilt, rotation, and telescopic extension of the boom arm - is controlled by smooth-operating geared crank handles. Fully folded length is 2.2m, with the boom extending a minimum of 50cm past the stand attachment and a...
Heavy-Duty Background Support Cross Bar kit for use with Lastolite pop up backgrounds and paper rolls
Comes with two stands, cross bar and caring case.
Stack of 8 x Apple Boxes.
We have a variety of types available including a smaller set which nest inside each other for easier transportation.
Keep lamps and camera safer by weighing your stands down with a sand bag.
Saddle bag to cradle your camera and keep it stable regardless of where it is mounted. Filled with small lightweight beads, it's designed to suit almost any camera in almost any situation.
Features of our Microphone Stands...
Strong tripod metal base increases durability
Adjustable height and angle for added versatility
Rubber feet grips increase its stability
Weighs over 2kg for increased steadiness and strength
Senior - 125cm x 60cm (59.5' X 24')
Junior - 92cm x 60cm (36" x 24")
The ergonomically designed Magliner hand truck is strong, lightweight and easy to use. We stock the Gemini versions, which allow you to use either as a sack truck, or as a four wheeled platform trolley with two...
3m x 3m Instant Shelter
The package includes;
Heavy Duty Anchor Kit, which consists of marquee stakes and heavy duty cam buckle adjuster.